INT=NO_INTERRUPT_REQUEST, TRIG=EDGE_TRIGGERED, COMB=OR_FUNCTIONALITY_A_
GPIO grouped interrupt control register
| INT | Group interrupt status. This bit is cleared by writing a one to it. Writing zero has no effect. 0 (NO_INTERRUPT_REQUEST): No interrupt request is pending. 1 (INTERRUPT_REQUEST_IS): Interrupt request is active. |
| COMB | Combine enabled inputs for group interrupt 0 (OR_FUNCTIONALITY_A_): OR functionality: A grouped interrupt is generated when any one of the enabled inputs is active (based on its programmed polarity). 1 (AND_FUNCTIONALITY_A): AND functionality: An interrupt is generated when all enabled bits are active (based on their programmed polarity). |
| TRIG | Group interrupt trigger 0 (EDGE_TRIGGERED): Edge-triggered 1 (LEVEL_TRIGGERED): Level-triggered |
| RESERVED | Reserved |